Contacta con nosotros

Información de interés

(Español) Internet 4G – 40 MB/S

4G Internet Conexiones 4G alta velocidad, packs de 50GB - 100GB y 150GB disponibles en nuestra tienda online.
...

HOW TO MAX OUT YOUR DISK DRIVE

One of the main elements of any computer or laptop is the hard drive. If the motherboard and RAM are the brain of the computer, the hard disk is the body. And as our bodies according to what activity you are going to practice you need to develop a series of muscles.

Just as a weightlifter is not the same as a marathon runner. Each type of hard drives complement your machine better or worse.

It depends on what you are looking for, speed or storage capacity, short latency or longer period of life, higher cost or lower cost etc.

Before deciding on a hard disk HDD or an SSD hard disk, it is best to consult a service expert technician in laptops and spare parts. For users, who need a work tool is necessary, that this has a good combination of speed and memory. 

However, if you want to transform an old-fashioned laptop into a decent machine, you have to analyze the components it has, to find the hard drive that will provide that extra performance.

What are the most usedtypes of hard drives?

The two most commonly used hard drives are HDDs and SSDs. 

The HDD hard drive has been on the market for many years and consists of several dishes that rotate on an axis and the information is recorded and reproduced through two needles or heads, one for reading and one for writing.

The hard disk HDD is still the most used and which usually comes from the factory with almost any computer or laptop. The reason is that they are discs with large storage capacity (500 Gb, 1Tb or 2 Tb) with a very affordable cost.

This means that if you have a more or less recent equipment. That is, of 4 years or less and that has at least 4 Mb of RAM and an Intel Core i3, i5 or i7 chip you have enough computing power and speed to do any task without problems.

On the other hand if you have a laptop over 4 years old and with slower chips such as an Intel Celeron, you need to quickly equip your machine to get it out of obsolescence. 

For this purpose SSD hard drives are the best solution. Because they are really chips with flash memory with another chip that serves to sort, record and retrieve information. As everything is digital in Solid State Drive disks, speed is the greatest of its advantages. The disadvantages for its part is its scarcity if you need to store more than 500 Gb of information and on the other hand every time we write on a SSD a corruption of the memory cells occurs.

This is the reason why an HDD lasts longer than an SSD.

Should I change my HDD for an SSD?

An excellent technical service is the best guide to know what type of hard disk suits you the most. No two users are the same, each person uses their computer or laptop in very different ways.

You may want to work with common programs such as Office or you need to edit video in 4K. Maybe you want to store many movies or to enjoy video games like Overwatch or League of Legends.

Definitely if your laptop is old and slow an SSD is the solution to get a few more years of life without investing a large amount of money. Going from waiting 2 or 3 minutes to load the operating system to about 40 seconds will confirm that it is money well spent.



Fixing the power jack of an Asus laptop with the laptop experts.

The experts in laptops fix the jack  of Asus laptop.

In this article the experts in laptops show us how to fix the electrical connection of an Asus F 550 C laptop.

The Asus technical service faces every day  new challenges in the repair of laptops in Fuengirola. In this case the laptops laptops specialists had to change and solder the electrical connection of an Asus F 550 C.

Lcd Portatiles repair connection-jack Asus F 550 C..

For this the Asus technical service  began by unplugging the laptop and removing the battery, avoiding the danger of having a short on the board or on the chip. Then we started to remove the screws from the cover of the back cover.

We remove the cover and remove the Ram and the hard disk by removing its 3 screws. Then proceed by unscrewing the rear case, which has 5 screws marked with a capital A. Fuengirola laptops specialists give us a trick: there are two other screws hidden in the back of the battery.

Once the experts in laptops in Málaga have opened the case. we must continue dismantling the flex cables of the ignition, keypad and the printer. In this way we can remove the keyboard with total security. We are going to continue taking out the optical unit.

The experts in laptops in Torremolinos explain that the connector or jack of the Asus F 550 C is not soldered to motherboard as it usually happens. The jack of this Asus connects with a cable to the motherboard.

So the base plate should be removed by removing the screws marked with a white arrow. Before removing the motherboard, you must remove the wifi card by removing its antennas and screws. After removing the wifi, we carefully remove the plastic that protects the flex cable from the screen and disconnect it.

Laptop experts weld the connector or jack of an Asus F 550 C

When lifting the plate and removing the hinge on the left side, the Asus F 550 C jack cable is loose and the damage is checked. Although it had some slack the specialists in portable in Torremolino verify that it is only necessary to weld the negative pole.

So to weld the three wires, they go to the negative pole. It gets a little warm and is placed in the holder. Laptops Laptops Laptops apply a bit of flux to achieve perfect computer repair.

Then a little tin on the left pole and a little tin solder on the 3 wires to join them.

Lcd Portátiles welding Asus jack.

It only remains to join them with another point of welding so that they remain firm. We return the cable, screw the hinge and connect the flex cables and motherboard.

Screw the base plate (5 screws), replace the wifi antenna in its place. We return the optical unit to its place and connect the flex cables (ignition, printer and keypad) of the keyboard. So that the keyboard is in its place we do a little pressure until we hear it click.

All we have to do is close the back cover with its 5 screws. Subsequently we return to place the RAM and the hard disk with its 3 screws.

We can already do a power-up test, the Asus F 550 C works perfectly. We just have to close the back plate, which hides the Ram and the hard drive.

Lcd Laptops has the spare you need for your laptop.

For the Asus technical service in Fuengirola there is no small repair. It does not matter if it takes minutes or days, the repair of your laptop will leave it like the first day.

They are also the most complete online store of spare parts for laptops both wholesale and retail.

 

(Español) Expertos en reparación de portátiles, soldando un mando de garaje o acceso.

On this occasion, the best experts in laptop repairing in Malaga received an easier assignment than they are used to.

The client brought the experts in repair of laptops, a control to open garages or access, which was not working. It did not emit any type of signal, reason why the LCD Portable equipment arrived quickly at the conclusion that it had to be something related to the battery.

It was enough to unscrew the remote control to realize what was not working, the board was in order but the support was clearly detached so the battery 2032 could not get the power to the remote control and it did not issue the corresponding orders .

Lcd Laptops clearly discovered the issue.

Although it is a repair, which does not offer too many technical difficulties, it is perfect for a review on how to make solders in the repair of electronics in general and laptops in particular. The first thing made by the experts of Lcd Laptops is to heat the base of the plate where the CR 2032 battery sits and the connections on the sides where the sopórte sits.

Image of the support before being welded back to the control plate.

Then we position the support in the exact place where it should be and we will apply a welding point on each side. To do this we will use our caotín and tin wire, we take a piece of tin about 5 centimeters. Instead of depositing a drop of solder, Sami’s team knows from experience that it is better to put some tin on the tip of the soldering iron and apply it.

With this technique we achieve a better precision of welding and a finer work, than applying a drop of melted tin. To do this, the LCD Laptops technicians (who are the most experienced in repairing LED televisions and laptops in Malaga), take the stand with the clamps in one hand and place it in the exact place where it should go. While with the soldering iron in the other hand apply tin, which they put on the tip of the soldering iron.

Placing the battery support.

This way the welding is perfect and very flat, this technique avoids the bulge that can occur if we weld  and the drop that falls by gravity,  we run the danger that the weld will be hollow and with the time connection problems will develop.

It only remains to put the battery with the positive side up as indicated by the support and lock the plate inside the remote, this work so well done by the experts in laptop repair, will allow the owner of the command to use it for many years and not have to buy another with a cost that is above 40 Euros.